See every cut before you set a tile.
Tile Dry Lay lays out your walls and floors on screen. You see where the pattern centers, what lands at each corner, and every cut numbered in the order you will set it.
Accounts are by invitation for now. Try it without an account.
Point at a piece to see its size.
How a layout comes together
- Enter the wall or the floor. Type the sizes the way you write them: 8' 2 1/2. Add the window, the niche, the door, the cabinets.
- Pick the tile and the pattern. Stacked, brick at 50% or 33%, herringbone, diagonal. Measure a real tile and the cuts follow its true size.
- Set where it starts. Center on a tile or on a grout joint. Wrap the corner. Slide it by hand until the cuts are the ones you want.
- Read the cuts in setting order. Every cut has a number and a finished size. Slivers show red before they cost you a tile.
Point at a piece to see its size.
Floors are set from the back of the room to the door
So that is how the cuts are numbered. Cut 1 is against the far wall and the last cut is at the doorway.
Cabinets and walls that jut into the room are blocked out, and the tile is cut round them. Tile stops 6" under a cabinet for the toe kick, or runs all the way under: click the cabinet to choose.
Where a wall cuts a tile in two, each side gets its own cut number, because on the job they are two cuts.
What it does today
- Walls with windows, niches and doors, tiled to the ceiling or to a height
- Up to four walls in a row, each centered or wrapped round the corner from the wall beside it
- A niche fitted to the tile lines with one press
- Floors with cabinets, toe kicks and a doorway
- Sizes to 1/16", nominal or measured
- Square footage for every wall and floor
- Projects saved to your account: each house holds its bathrooms, each bathroom its floors and walls
- A link that reopens the exact layout on any computer
Still being built
- Reading the bathrooms straight off your plans
- A set-out guide to print and take to the job
Every rule the layout engine follows is tested each time the site is published. See the tests and their results.